ABB MSR04X1模塊優勢備貨




ABB MSR04X1模塊優勢備貨該卡將診斷的當前總長度存儲在masDiagLen和
以masDiagMaxLen為單位的最大可能診斷長度。如果
最大診斷長度小于32,卡存儲擴展的
masDiagData數組中的診斷數據,最后兩個字節存儲在
masDiagExtOfs。如果最大長度大于32,則前24個字節
的擴展數據存儲在masDiagData中,而masDiagExtOfs包含
偏移到masCntrlExt區域(masCntll頁面中的3000h-3FFFh),其中
找到診斷數據的其余部分。讀取診斷之前,務必檢查masDiagLen中的當前長度,因?yàn)閺脑O(shè)備發送的診斷數據的長度可能會改變。主機可以為每個從機分配最多12個字符的指定字符串。
主機將其存儲在主控制塊的masDesig數組中
奴隸該數據不會在網絡上發送到從屬設備。主持人
應用程序可以使用它將特定的從設備與配置塊關聯,
然后通過名稱而不是塊編號訪問從機。例如
即使塊號或站號更改,您的應用程序也可能 仍然掃描塊列表以查找與中的名稱關聯的塊 從機指定數據區。ABB MSR04X1模塊優勢備貨
ABB MSR04X1模塊優勢備貨The card stores the total current length of the diagnostics in masDiagLen and
the maximum possible diagnostics length in masDiagMaxLen. If the
maximum diagnostic length is less than 32, the card stores the extended
diagnostic data in the masDiagData array with the final two bytes stored in
masDiagExtOfs. If the maximum length is greater than 32, the first 24 bytes
of extended data are stored in masDiagData and masDiagExtOfs contains the
offset into the masCntrlExt area (3000h-3FFFh in the masCntrl page) where
the remainder of the diagnostic data is found. Always check the current length in masDiagLen before reading the diagnostics since the length of the diagnostic data sent by the slave may change.The host can assign a designation string of up to 12 characters to each slave.
ABB MSR04X1模塊優勢備貨The host stores it in the masDesig array in the master control block for the
slave. This data is not sent out on the network to the slave. The host
application can use it to associate a specific slave with a configuration block,
then access the slave by name rather than by block number. For example,
even if block numbers or station numbers changed, your application could
still scan through the block list to find the block associated with the name in
the slave designation data area.ABB MSR04X1模塊優勢備貨
