AS/NZS 2269.0結構膠合板
AS/NZS 2269.0結構膠合板—測試標準
AS/NZS 2269.0 Plywood-structural
AS/NZS 2269.0 結構膠合板
?
AS/NZS 2269.0結構膠合板—測試范圍
This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided. The Standard also specifies veneer quality, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades.
本標準規定了結構膠合板的制造、分級、涂飾和品牌化的要求。還提供了應力等級和表面等級的規格。該標準還規定了指定f級的單板質量、粘結質量、標準鋪設結構、尺寸公差、接縫、含水率和特征強度和剛度值
?
AS/NZS 2269.0結構膠合板—檢測項目及方法
AS/NZS 2098.4 Dimensions(Thickness,Length,Width) 尺寸(厚度、長度和寬度)
AS/NZS 2098.4 Squareness 垂直度
AS/NZS 2098.4 Straightness of edges 邊直度
AS/NZS 2098.4 Flatness翹曲度
AS/NZS 2098.1 Moisture content含水率
AS/NZS 1604.1 Immunization of lyctid-susceptible sapwood ?木質抗蟲性
AS/NZS 2098.11 Formaldehyde emission 甲醛釋放量
Structural joints in plywood sheet 接口質量?
AS/NZS 2098.2 Bond quality(Type 1) 膠合質量
AS/NZS 2098.3 Scarf bending stength(Type 2)彎曲強度
AS/NZS 2098.2 Bond quality(Type A) 膠合質量
AS/NZS 2269.1 7.1 Bending strength
AS/NZS 2269.1 7.2 Modulus of elasticity and rigidity
AS/NZS 2269.1 7.1 Bending strength彎曲強度
AS/NZS 2269.1 7.2 Modulus of elasticity and rigidity彈性和剛性模量
AS/NZS 2269.1 7.3 Tension strength拉伸強度
AS/NZS 2269.1 7.4 Panel shear strength剪切強度
AS/NZS 2269.1 7.5 Compression strength抗壓強度
?
詳情請咨詢：中科易朔防火技術服務有限公司
出自：GF2021
