EC11 高低溫試驗箱 Sun Electronic?? EC10 溫度試驗箱 Sun Electronic Systems, Inc

?

?

Sun Electronic Systems, Inc EC11 高低溫試驗箱與 Sun ElectroniSystems, Inc

?EC10 型號相似，增加了實現(xiàn) 48C/min 升溫速率的能力。 .7 ft3 立方英尺室使用垂直氣流和對流式加熱，溫度范圍為 -184°C 至 315°C（使用 LN2）和 -73°C 至 315°C（使用 LCO2）

TEMPERATURE CHAMBER - EC11 MODEL Sun Electronic Systems, Inc.

The Sun Electronic Systems, Inc. EC11 temperature test chamber is similar to the Sun Electronic Systems, Inc. EC10 model, with the added capability of achieving 48C/min heating rate. The .7 ft3?cubic foot chamber uses vertical air flow with convection style heating and has a temperature range of -184°C to 315°C (using?LN2) and -73°C to 315°C (using?LCO2). The Sun Electronic Systems, Inc. EC11 model uses the advanced and extremely flexible?TC10?controller to provide features such as non-volatile memory to store user temperature profiles and parameters, an additional probe (for monitoring and control of product temperature), adjustable ramp rate, power down restart, analog and auxiliary I/O. Built in?IEEE-488 (GPIB), RS232/RS422?remote interfaces are standard features on the EC11 chamber. The chamber can function on it's own in an Automated Test Environment. Standalone operation is supported by a full function keyboard with a 2 line, 16 character LCD display. The electrically isolated chamber temperature and user temperature probe readings are normally displayed continuously and either probe may be used for control to ensure the proper temperature is achieved for the DUT. User programs are easily entered into the EC11 chamber using a BASIC like command set programming language and stored in non-volatile memory along with user adjustable controller parameters.

Probe calibration procedures are built in using a local menu driven format and parameters such as the PID coefficients are adjustable from the keyboard and remote interfaces. In addition, alarm function and sound level, BAUD rate, interrupt assignments and other communication port options are configurable from the front panel using an easy, menu driven format.

EC1x Models

• EC1A?(.37 ft3)

• EC1A-PM?(.37 ft3)

• EC11A-PM?(.37 ft3)

• EC11A?(.37 ft3)

• EC10?(.7 ft3)

• EC11?(.7 ft3)

• EC12?(2.2 ft3)? Sun Electronic Systems, Inc.

• EC13?(3.0 ft3)?? Sun Electronic Systems, Inc.

• EC16?(6.16 ft3)?? Sun Electronic Systems, Inc.

• EC1xHA

The Sun Electronic Systems, Inc. EC11 can also be controlled remotely from the RS232/422 port or the IEEE-488 bus interface. As well as being displayed on the front panel, temperature readings are accessible from the IEEE-488 or RS232/422 interfaces as are commands for setting chamber temperature, ramping rates, soak time at temperature, temperature deviation limits, temperature upper and lower limits. Local programs may be uploaded/downloaded to the controller and special communication commands allow for communication to the analog and auxiliary I/O ports.

The chamber supports several safety features including a mechanically or electronically adjustable over temperature?limit protection module, upper and lower software temperature limits, processor watchdog timer as well as open and short probe detection. The EC11 can also be equipped with a?switching matrix door?to allow measurement of up to 160 components.

The model Sun Electronic Systems, Inc. EC11 benchtop temperature cycling chamber is designed to be adaptable to your system application. If you would like a quote or have special requirements, please call Sun Electronic Systems for solutions.

EC11 Temperature Chamber Specifications

• Power: 4200 WATTS

• Voltage (frequency): 220 VAC (50/60Hz)

• ?

• Heat Rate: 48C/min

• Cool Rate: 30C/min

• Air Flow: 120 CFM

• Workspace Dimensions: 12"(W) x ? ? ?9.75"(H) x 10.25"(D)

• Overall Dimensions: 21"(W) x ? ? ?16"(H) x 24"(D)

• Volume: .7 cubic feet

• Weight: 49 lbs.

• ?