準(zhǔn)備好COM線

連電腦后，查看是幾號COM口

接入H3C S5500V2核心交換機(jī)的CONSOLE口

通過SecureCRT軟件接入核心交換機(jī)，輸入管理員用戶名和密碼

可以先ping一下

看交換機(jī)配置，telnet、ssh、ssh2都有可能。這邊用的是ssh2

ssh2接入成功后，輸入管理員用戶名和密碼

接入后

[SW-SHGXX-12F-15]interface GigabitEthernet1/0/22

[SW-SHGXX-12F-15-GigabitEthernet1/0/22]port access vlan 102

[SW-SHGXX-12F-15-GigabitEthernet1/0/22]quit

[SW-SHGXX-12F-15]write

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

[SW-SHGXX-12F-15]quit

保存好log記錄，配置完成。