GB 17565-2022 英文版/外文版 防盜安全門通用技術條件 GBT 17565-2022 英文版/外文版 GB/T 17565-2022 英文版/外文版 ? 前?言 本文件按照 GB/T1.1-2020?《標準化工作導則?第1部分：標準化文件的結構和起草規則》的規定起草。 本文件代替GB17565-2007 《防盜安全門通用技術條件》,與 GB17565-2007相比，除結構調整和編輯性改動外，主要技術變化如下： a)?增加了部分術語和定義(見3.3～3.5、3.7～3.9),更改了部分術語和定義(見3.1、3.2、3.6,2007年版的3.1～3.3); b)?更改了防盜安全門的“分級”,更改了防盜安全級別的表示方法、對破壞工具的要求等(見4.1, 2007年版的4.1、5.6.1); c)?增加了防盜安全門的“分類”(見4.2); d)?更改了防盜安全門的“標記”(見4.3,2007年版的4.3); e)?更改了外觀、防盜安全門上所使用的材料等基本要求和試驗方法(見5.1.1、5.1.3、6.1.1、6.1.3, 2007年版的5.1、5.2、6.2、6.3); f)?更改了永久性標志的內容和樣式(見5.1.2,2007年版的5.3); g)?更改了“標識”的內容并作為技術要求進行規定，增加了其檢驗方法(見5.1.4、6.1.4,2007年版的8.1); h)?刪除了“板材材質”和“其他材質的板材厚度”的內容(見2007年版的5.4.1、5.4.3),更改了“鋼 板厚度要求”內容，增加門框下框的要求，更改了鋼板厚度允許負偏差要求，及相應的試驗方法 (見5.2、6.2,2007年版的5.4.2、6.5.2); i)?增加了鎖具的分類及其試驗方法(見5.3.1.1、6.3.1.1),增加了通用性鎖具的尺寸和外形的技術 要求(見附錄A); j)?更改了不同防盜安全級別對防盜鎖具的配置要求和試驗方法(見5.3.1.2、6.3.1.2,2007年版的5.6.1、5.10.2、5.10.3、6.11),增加了防盜鎖具從防護面?zhèn)群头欠雷o面?zhèn)乳_啟的要求(見5.3.1.2); k)?更改了防盜鎖具加強防護板要求和試驗方法(見5.3.2.1、6.3.2.1,2007年版的5.10.1、6.11); l)?增加了鎖芯防鉆套及拉手強度要求和試驗方法(見5.3.2.2、5.3.2.3、6.3.2.2、6.3.2.3); m)?更改了“鉸鏈及其安裝要求”和試驗方法(見5.4、6.4,2007年版的5.9、6.10); n)?更改了“鎖定栓”要求和試驗方法(見5.5、6.5,2007年版的5.10.4、5.10.5、6.11); o)?增加了“門鏡”要求和試驗方法(見5.6、6.6); p)?更改了門扇與門框的尺寸公差、搭接寬度與配合間隙等要求，以及相應的試驗方法(見5.7、6.7,2007年版的5.5、6.6),刪除了門扇平面度要求(2007年版的5.5.4); q)?增加了“表面質量”要求及試驗方法(見5.8、6.8); r)?更改了“防破壞性能”要求及試驗方法(見5.9、6.9,2007年版的5.6.2、6.7.2); s)?更改了“軟沖擊性能”要求及試驗方法(見5.11、6.11,2007年版的5.6.4、6.7.4); t)?更改了“懸端吊重性能”要求(見5.12,2007年版的5.7); u) 增加了“其他附加功能”要求及試驗方法(見5.14、6.14); v)?增加了有關外部應急電源接口的要求及試驗方法(見5.15.3、6.15.3); w)?刪除了包裝、運輸和貯存(2007年版的8.2、8.3、8.4)。 請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別專利的責任。 本文件由中華人民共和國公安部提出并歸口。 本文件及其所代替文件的歷次版本發布情況為： ——1998年首次發布為GB17565-1998,2007年第一次修訂； ——本次為第二次修訂。 引言 GB17565-2007《防盜安全門通用技術條件》已實施十多年，對指導我國防盜安全門產品的研發、生產及提升產品的質量起到了積極作用。隨著行業和技術發展，亟須對原標準進行修訂，以進一步提高產品的質量水平，適應國家高質量發展的行業趨勢。本次標準修訂，修改了原有表示安全等級的標記方式以滿足標準國際化要求，并適度增加了產品級別以滿足更高安全防范場合對產品的需求；為了保持標?準的延續性，本文件中的1級～4級與GB17565-2007中的丁～甲級相當；為了便于協調各類實體防 護產品的安全防范能力評價，對破壞試驗所使用的工具進行了規范；為了提高防盜安全門用鎖具的互換性，本文件中提出通用型鎖具的外觀尺寸要求，以促進和規范行業的良性發展。 防盜安全門通用技術條件 1?范圍 本文件規定了防盜安全門的分級、分類、標記與技術要求，描述了防盜安全門的試驗方法，確定了防盜安全門的檢驗規則。 本文件適用于防盜安全門及其他重要場所使用的具有類似防盜功能的戶門的設計、制造、檢測、驗收。 2?規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文 件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 9286-2021?色漆和清漆 劃格試驗 GB 10409-2019 防盜保險柜(箱) GB 18580?室內裝飾裝修材料 人造板及其制品中甲醛釋放限量 GA/T 73-2015 機械防盜鎖 GA 374-2019 電子防盜鎖 3?術語和定義 GB 10409 界定的以及下列術語和定義適用于本文件。 3.1 防盜安全門 burglary-resistant security door 在一定時間內可以抵抗一定條件下非正常開啟，具有一定安全防護性能并符合相應防盜安全級別的門。 注：簡稱“防盜門”。 3.2 防盜安全級別?burglary-resistant security class 在規定的破壞工具作用下，按防盜門最薄弱環節能夠抵抗非正常開啟的時間長短劃分的等級。 3.3 防護面?protection surface 防盜門處于被防護區域外側的門扇表面。 3.4 鎖定栓?locking bolt 達到一定強度、約束門扇與門框相對活動的栓狀裝置。 3.5 簡易手工工具?simple hard tool 包括各種式樣的長度小于或等于150 mm、直徑小于或等于25 mm的五金工具。 3.6 普通手工工具 common hand tool 包括鑿子、沖頭、楔子、螺絲刀、鋼鋸、扳手、鉗子、質量小于或等于3.6 kg的鐵錘以及長度小于或等于1.5 m、直徑小于或等于25 mm(或者相等截面積)的撬扒工具。 [來源：GB?10409-2019,3.16,有修改] 3.7 便攜式電動工具?portable electric tool 鉆頭直徑小于或等于12.7 mm、功率小于或等于1800 W 的便攜式手持電鉆；沖頭直徑小于或等于25.4 mm、功率小于或等于2400 W的便攜式電動沖擊錘及加壓裝置。 [來源：GB 10409-2019,3.17] 3.8 專用便攜式電動工具?specific portable electric tool 便攜式切割機、便攜式砂輪機、電鋸的總稱。 [來源：GB 10409-2019,3.18] 3.8.1 便攜式切割機?portable cutting machine 具有高速鋼、鑲硬質合金刀齒且直徑小于或等于203 mm、功率小于或等于2400 W、轉速小于或等于8000 r/min的手持切割機。 [來源：GB 10409-2019,3.18.1] 3.8.2 便攜式砂輪機?portable abrasive cutting wheel 砂輪片直徑小于或等于203 mm、厚度小于或等于3.2 mm、功率小于或等于2400 W、轉速小于或等于8000 r/min 的電動手持盤形砂輪機。 [來源：GB10409-2019,3.18.2] 3.8.3 電 鋸?electric saw 圓鋸、鋸孔鋸、往復鋸的總稱。 [來源：GB 10409-2019,3.18.3] 3.8.3.1 圓 鋸?circular?saw 具有高速鋼或鑲硬質合金刀齒、圓鋸片直徑小于或等于203 mm、功率小于或等于2400 W、轉速小于或等于5000 r/min的電動鋸。 [來源：GB 10409-2019,3.18.3.1] 3.8.3.2 鋸孔鋸?hole saw 具有高速鋼或鑲硬質合金的刀齒、孔直徑小于或等于76 mm,并與便攜式手持電鉆配合使用的用來切割孔的圓柱形鋸裝置。 [來源：GB 10409-2019,3.18.3.2,有修改] 3.8.3.3 往復鋸?reciprocating saw 具有高速鋼或鑲硬質合金刀齒的、功率小于或等于2400 W 的手持往復式鋸裝置。 [來源：GB10409-2019,3.18.3.3, 有修改] 3.9 凈工作時間 net working time 實際的破壞攻擊時間，不包括試驗準備時間及試驗過程中可能延誤的時間。 [來源：GB 10409-2019,3.13] 3.10 615 cm2 開口 615 cm2 opening 最小邊長尺寸為152 mm 的矩形開口，或直徑為281 mm的圓形開口，或斜邊長為497 mm的等腰直角三角形開口。

Foreword

?

?

This document is developed in accordance with the rules given in GB/T 1.1-2020?

Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents

.

?

This document replaces GB 17565-2007?

General specification for burglary resistant safety door

. In addition to structural adjustments and editorial changes, the following main technical changes have been made with respect GB 17565-2007:

?

a)?Some terms and definitions are added (see 3.3~3.5 and 3.7~3.9 hereof), and some are changed (see 3.1, 3.2 and 3.6 hereof; 3.1~3.3 of Edition 2007);

?

b)?The "grading" of burglary-resistant security doors, the expression of burglary-resistant security class and the requirements for destruction tools are changed (see 4.1 hereof; 4.1 and 5.6.1 of Edition 2007);

?

c)?The "classification" of burglary-resistant security doors is added (see 4.2 hereof);

?

d)?The "labeling" of burglary-resistant security doors is changed (see 4.3 hereof; 4.3 of Edition 2007);

?

e)?The basic requirements and test methods for appearance of and materials used on burglary-resistant security doors are changed (see 5.1.1, 5.1.3, 6.1.1 and 6.1.3 hereof; 5.1, 5.2, 6.2 and 6.3 of Edition 2007);

?

f)?The content and style of permanent marking are changed (see 5.1.2 hereof; 5.3 of Edition 2007);

?

g)?The content of "identification" is changed and specified as a technical requirement, and its inspection method is added (see 5.1.4 and 6.1.4 hereof; 8.1 of Edition 2007);

?

h)?The contents of "plate material" and "thickness of plates of other materials" are deleted (see 5.4.1 and 5.4.3 of Edition 2007), the content of "requirements for thickness of steel plate" is changed, the requirements for the lower door frame is added, and the requirements for the permissible negative deviation for steel plate thickness and the corresponding test methods are changed (see 5.2 and 6.2 hereof; 5.4.2 and 6.5.2 of Edition 2007);

?

i)?The classification of locks and their test methods (see 5.3.1.1 and 6.3.1.1 hereof) and the technical requirements for dimensions and shapes of universal locks (see Annex A hereto) are added;

?

j)?The configuration requirements and test methods for burglary-resistant locks for different burglary-resistant security classes are changed (see 5.3.1.2 and 6.3.1.2 hereof; 5.6.1, 5.10.2, 5.10.3 and 6.11 of Edition 2007), and the requirements for burglary-resistant locks to be opened from the protection surface and the non-protection surface are added (see 5.3.1.2);

?

k)?The requirements and test methods for reinforced guard plates for burglary-resistant locks are changed (see 5.3.2.1 and 6.3.2.1 hereof; 5.10.1 and 6.11 of Edition 2007);

?

l)?The strength requirements and test methods for lock cylinder anti-drill bushing and handles are added (see 5.3.2.2, 5.3.2.3, 6.3.2.2 and 6.3.2.3 hereof);

?

m)?The "hinges and their installation requirements" and the test methods are changed (see 5.4 and 6.4 hereof; 5.9 and 6.10 of Edition 2007);

?

n)?The requirements and test methods for "locking bolt" are changed (see 5.5 and 6.5 hereof; 5.10.4, 5.10.5 and 6.11 of Edition 2007);

?

o)?The requirements and test methods for "door mirror" are added (see 5.6 and 6.6 hereof);

?

p)?The requirements such as dimensional tolerances, lap width and fit clearance of door leaf and frame, as well as the corresponding test methods are changed (see 5.7 and 6.7 hereof; 5.5 and 6.6 of Edition 2007), and the requirements for flatness of the door leaf are deleted (see 5.5.4 of Edition 2007);

?

q)?The requirements and test methods for "surface quality" are added (see 5.8 and 6.8 hereof);

?

r)?The requirements and test methods for "vandal resistance" are changed (see 5.9 and 6.9 hereof; 5.6.2 and 6.7.2 of Edition 2007);

?

s)?The requirements and test methods for "soft impact performance" are changed (see 5.11 and 6.11 hereof; 5.6.4 and 6.7.4 of Edition 2007);

?

t)?The requirements for "hoisting capacity of hanging end" are changed (see 5.12 hereof; 5.7 of Edition 2007);

?

u)?The requirements and test methods for "other additional functions" are added (see 5.14 and 6.14 hereof);

?

v)?The requirements and test methods for external emergency power supply interfaces are added (see 5.15.3 and 6.15.3 hereof);

?

w)?The contents of packaging, transportation and storage are deleted (see 8.2, 8.3 and 8.4 of Edition 2007).

?

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.

?

This document was proposed by and is under the jurisdiction of the Ministry of Public Security of the People's Republic of China.

?

The previous editions of this document are as follows:

?

——This document was first issued as GB 17565-1998 in 1998, and first revised in 2007;

?

——This is the second revision.

?

Introduction

?

GB 17565-2007?

General specification for burglary resistant safety door

, which has been implemented for more than ten years, has played a positive role in guiding the research and development, production and quality improvement of China's burglary-resistant security door products. With the development of industry and technology, it is urgent to revise the original standard in order to further improve the quality level of products and adapt to the industry trend of national high-quality development. In this revision of the standard, the original labeling method for security class is modified to meet the internationalization requirements of the standard, and some product classes are moderately added to meet the demand for products in higher security occasions; in order to maintain the continuity of the standard, Classes 1 to 4 in this document are comparable to Classes D to A in GB 17565-2007; in order to facilitate the coordination of the security capability evaluation on various types of physical protection products, the tools used in the destruction test are regulated; and in order to improve the interchangeability of locks for burglary-resistant security doors, the appearance and dimension requirements for universal locks are proposed in this document to promote and standardize the benign development of the industry.

?

General specifications for burglary-resistant security doors

?

1?Scope

?

This document specifies the grading, classification, labeling and technical requirements of burglary-resistant security doors, describes the test methods for burglary-resistant security doors, and determines the inspection rules for burglary-resistant security doors.

?

This document is applicable to the design, manufacture, testing and acceptance of burglary-resistant security doors and doors with similar burglary-resistant functions used in other important places.

?

2?Normative references

?

The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

?

GB/T 9286-2021

Paints and varnishes - Cross-cut test

GB 10409-2019

Burglary-resistant safes

GB 18580

Indoor decorating and refurbishing materials - Limit of formaldehyde emission of wood-based panels and finishing products

GA/T 73-2015

Burglary-resistant mechanical locks

GA 374-2019

Burglary-resistant electronic locks

?

3?Terms and definitions

?

For the purposes of this document, the terms and definitions given in GB 10409 and the following apply.

?

3.1

burglary-resistant security door

door that can undergo abnormal opening under certain conditions, has certain security protection performance and meets the corresponding burglary-resistant security class

?

Note: It is referred to as "security door".

?

3.2

burglary-resistant security class

security class of a security door divided according to the duration that the weakest link of the security door can undergo abnormal opening under the action of the specified destruction tool

?

3.3

protection surface

door leaf surface of a security door outside the protected area

?

3.4

locking bolt

bolt-like device with a certain strength that restrains the relative movement of the door leaf and the door frame

?

3.5

simple hard tool

all kinds of hardware tools with a length of less than or equal to 150 mm and a diameter of less than or equal to 25 mm

?

3.6

common hand tool

chisels, punches, wedges, screwdrivers, hacksaws, wrenches, pliers, hammers with a mass of less than or equal to 3.6 kg and prying tools with a length of less than or equal to 1.5 m and a diameter of less than or equal to 25 mm (or equivalent cross-sectional area)

?

[Source: GB 10409-2019, 3.16, modified]

?

3.7

portable electric tool

portable hand-held electric drills with a bit diameter of less than or equal to 12.7 mm and a power of less than or equal to 1,800 W; and portable electric impact hammers and pressurizing devices with a punch diameter of less than or equal to 25.4 mm and a power of less than or equal to 2,400 W

?

[Source: GB 10409-2019, 3.17]

?

3.8

specific portable electric tool

a general term for portable cutting machine, portable abrasive cutting wheel and electric saw

?

[Source: GB 10409-2019, 3.18]

?

3.8.1

portable cutting machine

hand-held cutting machine with high-speed cemented carbide-inlaid steel teeth, with a diameter of less than or equal to 203 mm, a power of less than or equal to 2,400 W and a speed of less than or equal to 8,000 r/min

?

[Source: GB 10409-2019, 3.18.1]

?

3.8.2

portable abrasive cutting wheel

electric hand-held disc abrasive cutting wheel with a grinding wheel diameter of less than or equal to 203 mm and thickness of less than or equal to 3.2 mm, a power of less than or equal to 2,400 W, and a speed of less than or equal to 8,000 r/min

?

[Source: GB 10409-2019, 3.18.2]

?

3.8.3

electric saw

a general term for circular saw, hole saw and reciprocating saw

?

[Source: GB 10409-2019, 3.18.3]

?

3.8.3.1

circular saw

a kind of electric saw with high-speed steel or cemented carbide-inlaid teeth, with a circular saw blade diameter of less than or equal to 203 mm, a power of less than or equal to 2,400 W, and a speed of less than or equal to 5,000 r/min

?

[Source: GB 10409-2019, 3.18.3.1]

?

3.8.3.2

hole saw

cylindrical saw device for cutting holes with high-speed steel or cemented carbide-inlaid teeth, with a hole diameter of less than or equal to 76 mm, for use together with portable hand-held electric drill

?

[Source: GB 10409-2019, 3.18.3.2, modified]

?

3.8.3.3

reciprocating saw

hand-held reciprocating saw device with high-speed steel or cemented carbide-inlaid teeth, with a power of less than or equal to 2,400 W

?

[Source: GB 10409-2019, 3.18.3.3, modified]

?

3.9

net working time

actual destructive attack time, excluding test preparation time and possible delays during the test

?

[Source: GB 10409-2019, 3.13]

?

3.10

615 cm2?opening

rectangular opening with a minimum side length of 152 mm, or circular opening with a diameter of 281 mm, or an isosceles right triangle opening with a hypotenuse length of 497 mm

?