1、空調設備歐盟CE認證指令

MD機械指令：2006/42/EC

2、空調設備歐盟CE認證標準：

EN ISO 12100：2010 機械安全 - 用于設計的一般準則-風險評估及風險降低

EN 60204-1：2018 機械安全.機械電氣設備.第1部分：一般要求

EN 12312-17:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment飛機地面支持設備.特殊要求.第17部分：空調設備

3、EN 12312-17:2004+A1:2009適用范圍：

This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of specific air conditioning equipment for aircraft ground support, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This document is not dealing with the hazards of air conditioning machinery itself, but with the equipment for the specific application of such machinery as aircraft ground support equipment. This document applies to all types of moveable air conditioning equipment with evaporators for cooling, heating and ventilating the interior of civil aircraft from outside (ground air conditioning). Examples see Annex A. It also applies to air conditioning units and accessories, e.g., hoses, couplers, mounted on moveable parts of passenger boarding bridges and/or moveable parts of fixed centralized aircraft air conditioning equipment, whether passenger boarding bridge mounted or ramp integrated. This document does not establish requirements for noise and vibration Noise and vibration are dealt with respectively in EN 1915-4 and EN 1915-3. This document is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This Part of EN 12312 is not applicable to air conditioning equipment, which is manufactured before the date of publication of this standard by CEN. This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.上海郜盟提醒您，本文件規定了在根據制造商或其授權代表給出的規范進行飛機地面支持專用空調設備的調試、操作和維護過程中，將第4條所列危險降至最低的技術要求。它還考慮了當局、飛機和地面支持設備（GSE）制造商以及航空公司和處理機構認為至關重要的一些性能要求。本文件不涉及空調機械本身的危害，而是涉及此類機械的具體應用設備，如飛機地面支持設備。本文件適用于所有類型的帶有蒸發器的移動式空調設備，用于從外部對民用飛機內部進行冷卻、加熱和通風（地面空調）。示例見附錄A。它也適用于安裝在乘客登機橋活動部件和/或固定集中式飛機空調設備活動部件上的空調裝置和附件，例如軟管、耦合器，無論乘客登機橋安裝還是坡道集成。本文件未規定噪聲和振動要求。噪聲和振動分別在EN 1915-4和EN 1915-3中進行了處理。本文件未涉及標準汽車底盤和停機坪交通的危險。EN 12312的本部分不適用于在CEN發布本標準之前制造的空調設備。EN 12312的本部分旨在與EN 1915-1、EN 1915-2、EN 1915-3（車輛）和EN 1915-4結合使用。

4、EN 12312-17:2004+A1:2009 歐盟CE認證測試、檢查項目

5、空調設備CE認證流程

1、提交CE申請

2、準備測試樣機和技術資料

3、樣機測試與整改

4、技術資料審核與整改

5、公告機構審核通過后，工廠獲得CE證書

6、設備加貼CE標識，順利在歐盟市場流通