MVI56E-CM模塊返回一個33字的狀態數據塊，可用于

確定模塊的運行狀態。此數據位于模塊的數據庫中

在寄存器15270至15302處以及在配置中指定的位置處。此數據為

與每個讀取塊一起連續傳輸?shù)紺ontrolLogix處理器。對于

狀態數據對象的完整列表，請參閱MVI56E-CM狀態數據定義。

5查看錯誤狀態表

每個單獨命令的命令執行狀態和錯誤代碼存儲在

主命令狀態/錯誤列表，保存在模塊的內部存儲器中。有

查看此數據的幾種方法。

查看監控Modbus端口中的命令狀態、從屬狀態和端口狀態

信息

配置命令錯誤指針參數（＜CmdErrPtr＞）以復制

狀態/錯誤值輸入模塊內存的用戶數據庫區域。

將此表復制到ReadData區域的一個部分，您可以在

ControlLogix控制器標記數據庫中的<READDATAARRAY>標記陣列。你可以

將這些值用于通信狀態監視和報警。

o<CMDERRPTR>=“MCM.CONFIG.PORTX.CMDERRPTR”

o<READDATAARRAY>=“MCM.DATA.READDATA[X]”

這些變量將保存示例程序或Add-On中的文字標記名稱

指示使用這些變量來適應未來的梯形圖或標記更改，同時

保持向后兼容性

The MVI56E-MCM module returns a 33-word Status Data block that can be used to

determine the module’s operating status. This data is located in the module’s database

at registers 15270 to 15302 and at the location specified in the configuration. This data is

transferred to the ControlLogix processor continuously with each read block. For a

complete listing of the status data object, refer to MVI56E-MCM Status Data Definition.

5.8.1 Viewing the Error Status Table

Command execution status and error codes for each individual command are stored in a

Master Command Status/Error List, held in the module’s internal memory. There are

several ways to view this data.

View Command Status, Slave Status and Port Status in the Monitoring Modbus Port

Information .

Configure the Command Error Pointer parameter (<CmdErrPtr>) to copy the

status/error values into the User Database area of module memory.

Copy this table to a section of the ReadData area, where you can view it in the

<READDATAARRAY> tag array in the ControlLogix controller tag database. You can

use these values for communications status monitoring and alarming.

o <CMDERRPTR> = "MCM.CONFIG.PORTX.CMDERRPTR"

o <READDATAARRAY> = "MCM.DATA.READDATA[X]"

These variables would hold the literal tag names in the sample program or Add-On

Instruction. Use these variables to accommodate future ladder or tag changes while

maintaining backward compatibilit

MVI94-GSC-E

MVI69-PDPS

MVI69-PDPMV1

MVI69-MNET

MVI69-MCM

MVI69E-MBS

MVI69-AFC

MVI56-PDPS

MVI56-PDPMV1

MVI56-MNETC

MVI56-MNET

MVI56-MCMR

MVI56-MCM

MVI56-LTQ

MVI56E-SIE

MVI56E-MNETC

MVI56E-MNET

MVI56E-MCMR

MVI56E-MCM

MVI56-BAS

MVI56-ADM

MVI46-MCM

MVI46-GSC

MV156E-MCMR

ILX56-PBM

ILX56-MM

AN-X2-AB-DHRIO

5302-MBP-MCM4/MB+

5302-MBP-MCM4

5301-MBP-DFCM

5205-DFNT-PDPS

5024-DFNT-PDPMV1