ASTM D1004塑料薄膜和薄板的抗撕裂強度的測試方法—標準名稱

ASTM D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

ASTM D1004塑料薄膜和薄板的抗撕裂強度的測試方法

ASTM D1004塑料薄膜和薄板的抗撕裂強度的測試方法—適用范圍

Scope:

This test method 2 covers the determination of the tear resistance of flexible plastic film and sheeting at very low rates of loading, 51 mm (2 in.)/min. and is designed to measure the force to initiate tearing. The specimen geometry of this test method produces a stress concentration in a small area of the specimen. The maximum stress, usually found near the onset of tearing, is recorded as the tear resistance in newtons (or pounds-force). The method is not applicable for film or sheeting material where brittle failures occur during testing or where maximum extension is greater than 101.6 mm (4 in.).

ASTM D1004塑料薄膜和薄板的抗撕裂強度的測試方法—引用文件

ASTM D618 Practice for Conditioning Plastics for Testing

ASTM D882 Test Method for Tensile Properties of Thin Plastic Sheeting

ASTM D883 Terminology Relating to Plastics

ASTM D4000 Classification System for Specifying Plastic Materials

ASTM D5947 Test Methods for Physical Dimensions of Solid Plastics Specimens

ASTM D6988 Guide for Determination of Thickness of Plastic Film Test Specimens

ASTM E4 Practices for Force Verification of Testing Machines

ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

出自GF2022