A system with more than four Keyphasor inputs

may use

a paired configuration provided there

are no more than four primary Keyphasor input

signals.

A paired configuration requires two

consecutive monitoring positions in either the

upper/lower or both half-slot positions. Four

Keyphasor modules will accept four primary

and four backup input channels and provide

four output channels (one per module).

A

configuration of two paired and one nonpaired (three Keyphasor modules total) is also

possible. In such

a configuration, the user may

configure the one non-paired Keyphasor

(order either two 2-channel or one 1-channel

and one 2-channel option)

The Isolated Keyphasor I/O module is designed

for applications where the Keyphasor signals

are tied in parallel to multiple devices and

require isolation from other systems, such as

a

control system. The Isolated I/O module was

created specifically for Magnetic Pickup

applications but is compatible with and will

provide isolation for Proximitor* applications as

long as an external power supply is provided.

The intent of this I/O module was primarily to

measure shaft speed and not phase. The

module can provide phase measurements, but

this I/O introduces

a slightly higher phase shift

than the Non-Isolated I/O version. Figure

1

shows the amount of phase shift that the

Isolated I/O modules will add at different

machine speeds.

具有四個以上鍵相器輸入的系統

可以使用

那里提供了配對配置

不超過四個主要鍵相器輸入

信號。

成對配置需要兩個

在任一

上/下或兩個半槽位置。四

鍵相器模塊將接受四個主要模塊

和四個備用輸入通道，并提供

四個輸出通道（每個模塊一個）。

A.

兩個成對和一個非成對（總共三個鍵相模塊）的配置也是

可能的在這種情況下

配置，用戶可以

配置一個非配對鍵相器

（訂購兩個2通道或一個1通道

和一個2通道選項）

設計了隔離鍵相器輸入/輸出模塊

用于鍵相器信號

并行連接到多個設備，并且

控制系統。隔離I/O模塊

專為磁性拾取器設計

應用程序，但與兼容

為Proximitor*應用程序提供隔離

只要提供外部電源即可。

此I/O模塊的目的主要是

測量軸速度，而不是相位。這個

模塊可以提供相位測量，但是

該I/O引入

稍高的相移

而非隔離I/O版本。