73.02-7.11?

Save & load selection

?保存&下載選擇

• 如花了20分鐘，丟失了選擇的，太可惜，學會保存。搜線保存方法首先去主菜單，點擊選擇-下拉菜單-重新選擇，丟失圖片的危機解除了，一箭雙雕，既保存了選項，同時保存了選項。?如果關閉PS，還是會丟失，不會永久保存。如果看標題標簽?zāi)┪?JPEG拓展名，不能保存這類信息。選擇保存信息，接下來關閉PSD，選擇下載選擇，下拉菜單選擇PSD。if i spend 20minutes on selection, now i made selection back, obviously Ctrl2 isn't going to be much help, because i lose stuff. go to top menu, click on select, from the dropdown, choose reselect, with crisis averted. now i got best of both worlds, i get to keep progress as well as my intricacy sections.if you clos PS, you'll no longer have it available, won't work indefinitely. save it as PSD file, go to file, now go to select save selection. next i'll close PSD. select load selection from drop down choose PSD.

74.04-7.12?

Activity Change Color T Shirt 2

改變T恤顏色

1. 這兩種方案并非專業喜歡的，因為沒有給你靈活性，技術會毀損性的，確保大小默認合適的。我想直接給T恤涂色，用快速選擇工具隔離，增大刷子大小，退出遠觀看起來好。?those two methods aren't the one professional prefer, because they don't give you enough flexibility, this technique is going to be non destructive, make sure they have a decent sized photo. i only want to target shirt, so we need to isolate it. grab my quick selection tool and i'll increase my brush size to about it, when you zoomed out everything looks better.?
   

2. 當我們近觀時，看到手表的問題，衣領的問題，手指攔住工具選擇衣服的問題，縮小刷子大小，搞定左半部分，右部分相對需要仔細一點，因為區域有點暗，導致誤選偏暗的牛仔褲。按住Alt開減去選擇區的不需要的像素類型。as we move closer, you can see there're problems with watch, a few issues with colar, his fingers prevented my tool from going all way in, i'll shrink brush considerably and i'll start adding in these areas. on the right side will have to be extra careful. because this area is considerably darker, so it will be tempted to select jeans as well. hold down Alt and start painiting away. the more you go over an area with Alt, the better PS will do, i don't need those types of pixels in my selection.?

3. 衣領并沒有被照顧到，用調節圖層，用色相和飽和度，注意到蒙版，因為有活躍選框，圖層蒙版理解這是作用于選區。所以創建包含T恤到蒙版。打開上色的復選框，現在簡單色相數據足夠，有些顏色看起來很明亮，建議避免太大飽和度導致失真。建議色相360，飽和度50，亮度-20剛剛好。i'll leave collar alone as well as any potential areas that didn't receive enough attention. next we'll using adjustment layer. go and enable hue and saturation. notice the mask, because we had an active selection. layer mask understood work on that area specifically. so it created a mask that contains only the shirt. enable colorize option. now simply move hue value. some colors might look a bit too bright. my advice is you turn down saturation for a realistic look. the hue value is 360. saturation is 50. for lightness use negative value of minus 20.

4. 點擊蒙版縮略圖開始繪制，用該情況的白色，隨時調節刷子大小和硬度。當替換顏色，創建好選擇。調節圖層是靈活，可以修改的，前提是圖片大小合適的?？傊畬W(xué)會了選擇，現在用快速選擇工具調節。click on mask thumbnail and start painting. use white in this case. it goes without saying you should adjust brush size and hardness. go to method. when i want to replace colors, create a good selection. then use an adjustment layer. it's flexible. non destructive. as long as you have a decent sized images. you've leanred about selections.

75.01-7.13

Review

復習

• 這些工具給工作做出更好的選擇。如果你不知道什么工作適合自己，會活在問題世界里。接下來我們聊一聊選擇和調節圖層。?in general, now can you modify them then quick selection tool was a much better option for those jobs. because you never know when you might need lovely on those skills, but if you haven't practiced them at all, then you'll be in a world of trouble.?

76.00-8.1?

Introduction?

簡介

• 我們繼續探索選擇工具，套索工具，鋼筆工具。比如從照片移除各種元素，比如把人從背景中圈選出來，可以從選擇工具獲取設置。我們繼續學習新技能，給下階段做準備。we'll continue to explore selections, we'll talk about lasso tool, pen tool for selection. we'll remove various things from photos, we'll also clip out a person from BG, you'll also pick up some tips about selections and how you can improve them with a few trick s and settings.?

77.04-8.2

Use Lasso Tools?

套索工具

1. 熱鍵L調取套索工具，當你想做粗略選擇，三種方法，套索工具是某種鋼筆工具，在畫布繪制做出選擇，抗曲折保平滑復選框選中。你可以羽化創建柔化邊界?？梢杂煤妥帜豢蜻x工具同樣的調節工具，shift加入選擇，光標后加號。Alt移除選擇，shift+Alt給交界選擇。?let's start section with lasso tools, when you want to make a rough selection, you have three of them in total, hotkey is L. the regular lasso tool works sort of pen tool. you grab it then you can draw anywhere on canvas to make selection. the anti-aliasing should be turned on. you also have feather option that create soft edges. you can use the same modifier keys that you used for marquee tool,shift adds to selection, notice plus symbol next to cursor. Alt removed parts of it. shift +Alt combined will give you intersection.??

2. 工具相互搭配使用。比如字幕框選矩形，可以添加套索工具移除部分，可以用魔術棒，進一步移除套索工具的部分。套索可以從畫布選擇，用來調整另一個選擇，當你想包含或移除部分區域的時候。當你涉獵多邊形套索工具，抗曲折平滑和羽化，依賴點擊可以更精確。在任何一點，松開鼠標，只能是直線，如果你客體有曲線，這不是理想工具。all those tools interwined with each other. you create a rectangular section with marquee tool, then you jump in with a lasso tool remove parts of it. you use magic wand further improve your selection by removing a big chunk with lasso tools. lasso tool is used to quickly pick up something from canvas. you'll use it to adjust another selection, mostly when you want to include or remove farily large parts. when you're going over to polygonal lasso tool. this has the exact some features as normal lasso. so anti-aliasing and feather, but it has better precision because it relies on clicks. at any point i can click and change direction. there's no give. we only have straight lines. if your object has any curves. this is not ideal tool for job.?
   

3. 多邊形套索工具和多邊形工具不同的，多邊形創建形狀，多邊形套索創建選區。磁性套索工具，頂部有很多特性，有控制工具特性。點擊，不再點擊鼠標，在上面停留一段時間，點擊最開始的點，現在移動鼠標。PS自動添加錨定點，基于我設置的點，設置數據越大，錨定點越大。magnetic lasso tool, immediately we get more features at the top and those controls tools' behavior. i'll click and i'll stop hovering over edge of building. i'm not clicking at all. i clicked once for initial point. now i'm moving mouse. PS is automatically adding anchor points based on frequency i set up top. the higher i raise it, the more anchor points i'm going to get. if the shape is complicated, more anchor points will result in a better selection.?

4. 如果搞砸了，可以重新開始，按空格鍵，刪除最后錨定點，可以繼續糾正線走向，最后接到最開始點，閉合選區。光標改變形狀?？梢栽黾訉Ρ榷?。相關的寬度，就是PS選擇邊緣，大概預留10像素，磁性套索工具，快速選擇非常好的工具。if i somehow messed things up and i don't want to start over, i can press back space key. this will delete your last anchor point, you can continue on correct line with all selections, you need to go background to the original point and close it off. you'll see cursor will change its appearance. you may need to ramp up contrast. the area where PS looks for edge, it's usually a good idea to leave it at around 10 pixels, that's magnetic lasso tool, a pretty solid option for making fast selecting with fairly high accuracy.?

78.05-8.3?

Pen Tool Overview?

鋼筆工具概述

1. 探討選擇目標的鋼筆工具，是勝任各種項目的強大工具。通過熱鍵P抓取鋼筆工具。最重要的設定是左上的，下拉菜單，可以設置路徑。選擇后創建錨定點，黑色實點，再點擊，相連起來。如果點擊拖拽，得到曲線，可以調節圓角?？梢栽冱c擊，相反方向，不放松鼠標，可以得到曲線，因為鋼筆工具可以延續線條走向。we'll talk about the pen tool for selection purposes. it's a powerful and versatile option for any project. grab pen tool through its hotkey P. the most important setting is this one, in top left, use this drop down, you want to set it to path. you click once to create an anchor point, its this black dot here, you click again, now there're connected. if you click and drag, you'll get a curve which is much more useful in your day to day work. you'll adjust its roundness. if you click it again, but in an opposite direction, and without holding down your mouse, you'll get curve, pen tool, wants to continue particular flow.

2. 如果你不用熱鍵，可以點擊鋼筆工具徽標，菜單的最后，反轉工具，點擊握住鼠標，任何錨定點會被改變。在選擇目標的鋼筆工具+路徑模式。如果想管理路徑，有特殊的面板是右側固定面板展示的，如果你沒有，從主菜單窗口-路徑來調取，像縮略圖的改變，這是呈現形式。選擇路徑按回車，找到最后打開的版本。避免丟失工作，雙擊路徑打開這區域，輸入你可以辨識名字，保存在PSD內。you can click and hold on pen tools' icon, for the last one, from fly out menu, it's convert point tool, i'm clicking and holding mouse click. any anchor point and click on will change, we're using pen tool in path mode, this is useful for selection purposes. if you want to manage your paths, you have a special panel for it. i have it docked here, but if you don't see it, go to window paths. you can see thumbnail changes, this is a representation of what's going on. if you hit enter, then you click on work path, you're going to get the latest one. to preventing losing your work. you can save path by double clicking in this region, input any name, it's going to be saved inside PSD.?

3. 回到最初錨定點，這是第一個，光標停留在上面，光標旁邊的圈，意味著閉合路徑，創建選擇，創建路徑兩個主要的選擇形式，點擊路徑面板底部第三個徽標，我偏好的方式右鍵選擇。彈出對話框問是否選擇羽化，不需要。保留光滑選項選中。在選項欄，保留自動羽化。you go back to the initial anchor point, this was my first one, if i hover over it. i'm getting a circle next to cursor. that means i'm about to close this path now we can create selection. there's two main choices to create a selection from a path. you want to click on 3rd icon at bottom of path panel. preferred method is to right click, from this list of press make selection, ask me if i want feather radius, that's not the case. i'll always keep anti-aliasing checked because this prevents jagged edges, in the option bar, by default, we have this feature called auto.?

4. ?當你在選中的路徑停留時，可以加入想要的錨定點，光標旁邊會有加號?？梢约尤胄碌腻^定點，如果在存在的錨定點停留，可以加入減號標志，移除錨定點，路徑保持關閉，不能移除一段，只是移除點。返回最初點關閉路徑，右鍵選擇創建選擇。when you hover over a selected path. you can add as many anchor points as you want on it,my cursor changes, it gets a plus symbol, that means i'm about to add a new anchor point. click and drag. if you're hovor over an existing point, you'll get this minus symbol, which means you can remove it. your path will remain closed, as this doesn't remove that segment instead of remove point. once you've closed off path by going back to origin point right click and choose create selection.?