H3C交換機(jī)COM口連接配置范例

注意COM線插上后的編號

按照說明書，輸入通訊參數(shù)

筆者軟件為SecureCRT

連通后輸入管理員賬戶和密碼

使用前記錄會(huì)話

范例：

<SW-SHGJL-CORE-1>sys

System View: return to User View with Ctrl+Z.

[SW-SHGJL-CORE-1]

[SW-SHGJL-CORE-1]interface GigabitEthernet1/0/20

[SW-SHGJL-CORE-1-GigabitEthernet1/0/20]port access vlan 60

[SW-SHGJL-CORE-1-GigabitEthernet1/0/20]exit

[SW-SHGJL-CORE-1]quit

<SW-SHGJL-CORE-1>write

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

<SW-SHGJL-CORE-1>dis cu

---