bently125840-02 必須安裝在左側專門設計的插槽中


3500電源為半高模塊
必須安裝在左側專門設計的插槽中
機架側面。3500機架可以包含一個或兩個
電源(交流和/或直流的任何組合)和
任一電源都可以為整個機架供電。如果已安裝,則第二個
電源充當主電源的備份。當兩個
電源安裝在機架中
下部插槽用作主電源
上部插槽用作備用電源。移除或
插入任一電源模塊都不會中斷
只要有第二電源
安裝。
3500電源可接受廣泛的輸入
電壓,并將其轉換為可接受使用的電壓
通過其他3500模塊。有三種電源版本
可與3500系列機械保護配套使用
系統如下:
1.交流電源
2.高壓直流電源
3.低壓直流電源
之前使用交流電源輸入模塊(PIM)的安裝
R版和/或M版之前的交流電源模塊
要求電壓輸入::85至125 Vac rms
88至140 Vdc:此選項使用高
電壓直流電源和
高壓直流電源
輸入模塊(PIM)。
20至30 Vdc:此選項使用低
電壓直流電源和
低壓直流電源
電源輸入模塊(PIM)。
超出范圍
保護:
對于所有電源版本,
欠電壓不會造成傷害
電源或PIM。
然而,過電壓將
導致上的保險絲斷開
皮姆。
The 3500 Power Supplies are half-height modules and
must be installed in the specially designed slots on the left
side of the rack. The 3500 rack can contain one or two
power supplies (any combination of ac and/or dc) and
either supply can power a full rack. If installed, the second
supply acts as a backup for the primary supply. When two
power supplies are installed in a rack, the supply in the
lower slot acts as the primary supply and the supply in the
upper slot acts as the backup supply. Removing or
inserting either power supply module will not disrupt
operation of the rack as long as a second power supply is
installed.
The 3500 Power Supplies accept a wide range of input
voltages and converts them to voltages acceptable for use
by other 3500 modules. Three Power Supply versions are
available with the 3500 Series Machinery Protection
System as follows:
1. ac Power Supply
2. High Voltage dc Power Supply
3. Low Voltage dc Power Supply
Installations using AC Power Input Modules (PIM) prior to
rev R and/or AC Power Supply Module prior to rev M
require voltage input:: 85 to 125 Vac rms
88 to 140 Vdc: This option uses the High
Voltage dc Power Supply and
the High Voltage dc Power
Input Module (PIM).
20 to 30 Vdc: This option uses the Low
Voltage dc Power Supply and
the Low Voltage dc Power
Supply Input Module (PIM).
Out of Range
Protection:
For all power supply versions,
an under-voltage will not harm
either the supply or the PIM.
However, an over-voltage will
cause the fuse to open on the
PIM.?
176449-08
167699-02
149992-01
146031-02
146031-01
138607-01
136483-01
136188-02
136188-01
135473-01
135137-01
133819-02
133396-01
133323-01
133292-01
130733-01
128229-01
125840-02
125840-01
125800-01
125768-01
125760-01
125720-01
125680-01
106M1079-01
106M1081-01