【液相問題解決方案】儀器應用waters PDA Lamp energy low（燈能量低）錯誤
故障描述
接通電源后初步診斷時出現 Lamp energy low（燈能量低）錯誤
環境
2998 光電二極管陣列檢測器
原因
1填充檢測器池的溶劑具有 UV 吸光度。
2.超出燈使用壽命
解決方法
1.將低 UV 吸收的溶劑（如甲醇）輸送到流通池中，然后打開電源。
2. 更換燈。部件號 201000273
SYMPTOMS
“Lamp energy low” error occurs during initial diagnosis, after power-on
"Lamp energy low" message
Lamp has far exceeded the number of recommended hours
PDA Shutter not found error message.
Low lamp energy when check at 225 nm with water in flow cell.
ENVIRONMENT
2998 Photodiode Array Detector
CAUSE
The solvent that fills the detector cell has UV absorption.
Lamp life exceeded
FIX or WORKAROUND
Deliver a solvent with low UV absorption, such as methanol, to the cell, and then power-on.
Replace the lamp. part number 201000273
標簽：
【液相問題解決方案】儀器應用waters PDA Lamp energy low（燈能量低）錯誤的評論 (共 條)
你需要登录后才可以评论。