產品介紹

　　型號名稱： F8620/11 模擬量擴展模塊

　　對于初始設定模式下實施控制所需要的必須設定項目、使用頻率較高的項目、更改頻率較高的設定項目歸為一組，只要設定好這些內容即可開始執行控制。所以，初次設定更容易。

　　配備有簡易的程序功能

　　通過設定9個階段的程序步，即可實施簡易的程序控制。通過時間，分別設定目標，從而可實施任意的溫度控制。

　　例：從開始實施程序控制時

　　(1)： 實施控制，使其在1小時后達到200℃

　　(2)： 使其在2小時候仍維持在200℃

　　(3)： 實施控制，使其在30分鐘后達到300℃

　　配備有簡易的程序功能

　　對于熱容量較小的物體，也可實施控制

　　采樣周期高達125ms，是以往產品的1/2倍。利用2倍的響應性，可對熱容量較小的物體等進行控制。

　　配備有上升沿自調諧功能

　　配備有上升沿自調諧功能，僅利用一次性的升溫動作，即可求出PID常數。無法利用自調諧求出常數的情況下，也可求出常數。

　　由于不執行ON/OFF動作，因此不會打亂控制方式。

　　配備有上升沿自調諧功能

　　其他特點

　　采用大型顯示和密鑰長度，提高可視性和操作性。

　　進深約為60mm的緊湊設計，可實現省空間。

　　輸出直流電流，可用作簡易的信號轉換器。

　　Product introduction

　　Model name: F8620/11

　　The items that must be set, the items with high frequency of use and the setting items with high frequency of change required for the implementation of control in the initial setting mode are grouped into a group. As long as these contents are set, the control can be executed. Therefore, the initial setting is easier.

　　Equipped with simple program function

　　Simple program control can be implemented by setting 9 stages of program steps. By specifying the time and setting the targets respectively, arbitrary temperature control can be implemented.

　　Example: from the beginning of program control

　　(1) : control to reach 200 ℃ after 1 hour

　　(2) : keep it at 200 ℃ for 2 hours

　　(3) : control to reach 300 ℃ after 30 minutes

　　Equipped with simple program function

　　For objects with small heat capacity, control can also be implemented

　　The sampling period is up to 125ms, which is 1 / 2 times that of previous products. With twice the responsiveness, objects with small heat capacity can be controlled.

　　Equipped with rising edge self tuning function

　　Equipped with rising edge self-tuning function, the PID constant can be obtained only by one-time heating action. If the constant cannot be obtained by self tuning, the constant can also be obtained.

　　Since the on / off action is not executed, the control mode will not be disturbed.

　　Equipped with rising edge self tuning function

　　Other features

　　Large display and key length are adopted to improve visibility and operability.

　　The compact design with a depth of about 60mm can save space.

　　The output DC current can be used as a simple signal converter.