Z7127 采用進口冷軋硅鋼片和純銅感應線圈制作，導電快，加熱效率高，加熱速度快！

　　型號：24RD

　　功率：3.6kVA

　　*小內徑：15mm

　　外徑：520mm

　　軸承重量：95kg

　　的特點：

　　1，帶操作面板，控制和使用簡便易行 每套松下伺服驅動器上都配有操作面板，各種參數和控制方式均可通過操作面板實行調整，非常適合于現場調試。面板可顯示運行速度、位置脈沖、實際轉矩、接線I/O狀態、參數設定、錯誤原因等大量信息。特別是實際轉矩的顯示給設計、選型提供了極大方便。通過操作面板可以檢查接線狀態，用戶可利用此功能判別接線錯誤，十分有效。

　　2，穩妥方便的自動調整，剛性調整更方便

　　用戶在調試設備時可以啟動自動增益調整功能來調節松下伺服系統的剛性。松下伺服在自動增益調整時運動范圍小（電機正轉兩圈反轉兩圈）運動速度低（約100rpm），所以在磨床等運動行程非常有限的場合運用時非常安全可靠。

　　3，控制方式多樣化

　　有三種控制方式可供選擇：速度控制方式、位置控制方式、轉矩控制方式 以上三種方式也可進行復合控制。其中位置控制方式極具特色，用戶可以采用電子線路、單片機、PC機及其他方式非常簡便而廉價地實現數控功能。系統中還配備了“電子齒輪”功能，也就是說可以通過參數設定對輸入指令脈沖任意分/倍頻而達到和機械系統的良好配合。

　　4，保護設施齊全

　　還配有各種自診斷保護措施，硬件軟件雙重保護，并可以勝任三倍過載。一旦發生錯誤，便立即停機，并告以報警故障原因，在用戶解除故障后方可重新工作，因此可靠性極高。

　　Z7127 It is made of imported cold-rolled silicon steel sheet and pure copper induction coil, with fast conductivity, high heating efficiency and fast heating speed!

　　Model: 24rd

　　Power: 3.6kva

　　Minimum inner diameter: 15mm

　　Maximum outer diameter: 520mm

　　Maximum bearing weight: 95kg

　　Features:

　　1. With operation panel, it is easy to control and use. Each set of Panasonic servo driver is equipped with operation panel. Various parameters and control modes can be adjusted through the operation panel, which is very suitable for on-site debugging. The panel can display a large amount of information such as running speed, position pulse, actual torque, wiring I / O status, parameter setting, error reason and so on. In particular, the display of actual torque provides great convenience for design and selection. The wiring status can be checked through the operation panel. Users can use this function to identify wiring errors, which is very effective.

　　2. Stable and convenient automatic adjustment, and rigid adjustment is more convenient

　　When debugging the equipment, users can start the automatic gain adjustment function to adjust the rigidity of Panasonic servo system. Panasonic servo has a small motion range during automatic gain adjustment (the motor rotates forward for two revolutions and reverses for two revolutions) and low motion speed (about 100RPM), so it is very safe and reliable when used in occasions with very limited motion stroke such as grinding machines.

　　3. Diversified control modes

　　There are three control modes to choose from: speed control mode, position control mode and torque control mode. The above three modes can also carry out compound control. Among them, the position control mode is very characteristic. Users can use electronic circuits, single chip microcomputer, PC and other methods to realize the NC function very simply and cheaply. The system is also equipped with the function of "electronic gear", that is, it can divide / multiply the input command pulse arbitrarily through parameter setting to achieve good cooperation with the mechanical system.