UNIFI 中出現錯誤信息：Leak sensor not present（滲漏傳感器不存在）

1. 
   

• 最后更新

• 2022年1月3日

2. 另存為PDF

3. ?

4. 
   

文章編號: 58122點擊此處訪問英文版本文章

故障描述

• 軟件中出現 Leak sensor not present（滲漏傳感器不存在）信息

• 重新啟動電子線路不能解決問題

• 退出軟件并重啟不能解決問題

環境

• UNIFI

• Xevo G2-XS

原因

Leak sensor not present（滲漏傳感器不存在）錯誤的背后隱含了另一個問題：流路滲漏。滲漏傳感器浸入溶劑積液中。

解決方法

1. 拉出傳感器。

2. 使用實驗室紙巾擦干傳感器的托盤。

3. 小心擦拭傳感器，使其干燥。

4. 小心地將傳感器放回原位置。

"Leak sensor not present" error message in UNIFI - WKB58122

1. 
   

• Last updated

• Dec 21, 2021

2. Save as PDF

3. ?

4. ?Share

Article number: 58122

SYMPTOMS

• "Leak sensor not present" message in the software

• Cycling electronics does not resolve the issue

• Exiting the software and restarting it does not resolve the issue

ENVIRONMENT

• UNIFI

• Xevo G2-XS

CAUSE

The "Leak sensor not present" error is masking a different issue: a?leak in the fluidics. The leak sensor is?immersed in a puddle of solvent.

FIX or WORKAROUND

1. Pull the sensor out.

2. Use?laboratory tissue to dry out the sensor's tray.

3. Carefully wipe the sensor itself and allow it?to dry.

4. Carefully put the sensor back into position.

ADDITIONAL INFORMATION