【液相應用】0602 waters樣品盤與針的一些問題
【液相應用】waters樣品盤與針的一些問題
菜鳥博士Caesar
分享是快樂的
FTN旋轉盤復位硬件出錯-旋轉盤驅動軸緊固螺絲松動
FTN rotary disk reset hardware error-rotary disk drive shaft fastening screw loose
故障描述
Fault description
ACQUITY系統出現Rotary Tray home h/w fault (旋轉盤復位硬件出錯)錯誤。 The ACQUITY system experienced a Rotary Tray home H/W fault
在系統開啟的情況下，按1’2’開關可以旋轉樣品盤，可以用手稍微晃動旋轉盤。 When the system is turned on, press 1' 2' switch to rotate the sample disc, and you can shake the disc slightly with your hand
環境
Environment
ACQUITY UPLC H-Class H 級
ACQUITY UPLC H-Class Bio H 級生物
ACQUITY UPLC H-Class PLUS H 級 PLUS
ACQUITY UPLC H-Class PLUS Bio H 級 PLUS 生物技術
ACQUITY UPLC Sample Manager - Flow Through Needle PLUS (sm-FTN PLUS) 樣品管理器-流經針加(sm-ftnplus)
ACQUITY Arc 擴展弧
ACQUITY Arc Sample Manager FTN-R 弧樣本管理器 FTN-R
原因
Reason
如果在系統開啟的情況下輕微手移動旋轉盤，表明旋轉盤驅動軸緊固螺絲松動. If the rotating disk is slightly moved by hand while the system is on, it indicates that the screw on the rotating disk drive shaft is loose
解決方法
Solutions
擰緊旋轉盤驅動軸緊固螺絲，重新校正轉盤。 Tighten the screw on the rotary drive shaft and recalibrate the rotary table
當 I-Class 針退出時，樣品瓶從樣品盤中提起
When the I-Class pin exits, the sample bottle is lifted from the sample tray
故障描述
Fault description
針退出時，樣品瓶正在從樣品盤中提起 When the needle exits, the sample bottle is being lifted from the sample tray
環境
Environment
UPLC I smP MGR-FL I smP MGR-FL
原因
Reason
旋轉樣品盤、r 軸和 zp 軸需要重新定義。
The rotating sample disk, R axis and ZP axis need to be redefined.
解決方法
Solutions
定義旋轉樣品盤。 Define the rotating sample tray
定義 r 軸。 Define the R axis
定義 zp 軸。 Define the ZP axis
