The outputs are currentlimited and protected

against over temperature. Each output channel consists of a current

limited and over temperature protected high side driver, EMC

protection components, inductive load suppression, output state

indication LED and an isolation barrier to theModulebus.

Features and benefits

16 channels for 24 V d.c. current sourcing outputs in one isolated group

Redundant or single configuration

Loop monitoring, supervision of short and open loadwith configurable limits (see table Table 97).

Diagnostic of output switches without pulsing on outputs

Advanced on-board diagnostics

Output status indicators (activated/error)

Degraded mode for normally energized channels (supported fromDO880 PR:G)

Currentlimitation at short circuit and over-temperature protection of switches

Faulttolerance of1(as defined in IEC 61508) for output drivers. For ND (Normally De-energized)

systems, outputs can still be controlledwith error on output drivers

輸出受到電流限制和保護

防止溫度過高。每個輸出通道由一個電流組成

有限和過熱保護的高側驅動器，EMC

保護組件、電感負載抑制、輸出狀態

指示LED和模塊的隔離屏障。

功能和優點

一個隔離組中用于24 V直流電流源輸出的16個通道

冗余或單一配置

回路監測，具有可配置限值的短負載和開路負載的監督（見表97）。

輸出開關無脈沖的診斷

高級車載診斷

輸出狀態指示燈（激活/錯誤）

正常通電通道的降級模式（由DO880 PR:G支持）

開關短路電流限制和過熱保護

輸出驅動器的容錯率為1（如IEC 61508中所定義）。對于ND（正常斷電）

系統，輸出仍然可以通過輸出驅動器上的錯誤進行控制

根據IEC 61508認證SIL3

根據EN 954-1認證為4類