GB/T 10824-2022 英文版 充氣輪胎輪輞實心輪胎技術規范

?

我司提供標準英文版，更多信息請?jiān)L問標準翻譯網bzfyw.com

Foreword

?

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.

?

This document is developed in accordance with the rules given in GB/T 1.1-2020?Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents.

?

This document replaces GB/T 10824-2008?Technical specification of solid tyres for pneumatic tyres rims. In addition to structural adjustments and editorial changes, the following main technical changes have been made with respect to GB/T 10824-2008:

?

———Some physical and mechanical property indexes are modified (see Table 1 hereof; Table 1 of Edition 2008);

?

———The durability requirements are modified (see 4.4 and 5.5 hereof; 4.4 and 5.5 of Edition 2008);

?

———The durability test method is deleted (see Annex D of Edition 2008).

?

This document was proposed by?the?China Petroleum and Chemical Industry Federation.

?

This document is under the jurisdiction of the National Technical Committee on Tyres and Rims of Standardization Administration of China (SAC/TC 19).

?

This document was firstly issued in 1989, firstly revised in 1996 and secondly revised in 2008, this is the third revision.

Technical specification of solid tyres for pneumatic tyres rims

?

1 ?Scope

?

This document specifies the technical requirements, test methods and markings of solid tyres for pneumatic tyres rims.

?

This document is applicable to new solid tyres for pneumatic tyres rims used for counterbalanced fork lift trucks and other industrial vehicles.

?

2 ?Normative references

?

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

?

GB/T 528Rubber, vulcanized or thermoplastic—Determination of tensile stress-strain propertiesGB/T 531.1Rubber vulcanized or thermoplastic—Determination of indentation hardness—Part 1: Durometer method (Shore hardness)GB/T 1689Rubber vulcanized—Determination of abrasion resistance (Akron machine)GB/T 2941Rubber—General procedures for preparing and conditioning test pieces for physical test methodsGB/T 3512Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven methodGB/T 6326Tyre terms and definitionsGB/T 8170Rules of rounding off for numerical values & expression and judgment of limiting valuesGB/T 22391Test method of endurance for solid tyres—Drum methodHG/T 2177Appearance quality of tyres

?

3 ?Terms and definitions

?

For the purposes of this document, the terms and definitions given in GB/T 6326 apply.

?

4 ?Requirements