基板具有鎖定機構，該鎖定機構將金屬背板連接到

DIN導軌，提供有效的接地連接。

1.將鎖定裝置旋轉到打開位置。鉤住后部的上唇

在DIN導軌的上邊緣上方固定基板，然后卡扣基板

完全進入安裝位置。

2.將鎖定裝置旋轉到滑動位置。沿著DIN滑動裝置

導軌到所需的安裝位置，并將其連接到相鄰的單元底板

帶有連接器插頭和插座。

3.將鎖定裝置順時針旋轉至鎖定位置。

ACS800標準應用程序7.x支持使用四個數據集，

每個方向兩個。

用于控制驅動器的兩個數據集被稱為主參考

數據集和輔助參考數據集。驅動器讀取的源

主參考數據集和輔助參考數據集由參數90.04和

分別為90.05。主參考數據集的內容是固定的。這個

可以使用參數90.01來選擇輔助參考數據集的內容，

90.02和90.03。

包含驅動器實際信息的兩個數據集稱為

主實際信號數據集和輔助實際信號數據集中。的內容

兩個數據集都是部分可選擇的，并且具有組92處的參數。

通過設置參數98.02 COMM.MODULE LINK（通信模塊鏈接）激活外部控制

給ADVANT。

The base plate has a locking mechanism that connects the metallic back plate to the

DIN rail, providing an effective ground connection.

1. Rotate the locking device to the OPEN position. Hook the upper lip at the rear

of the base plate over the upper edge of the DIN rail and snap the base plate

fully into the mounting position.

2. Rotate the locking device to the SLIDE position. Slide the unit along the DIN

rail to the desired mounting position and attach it to the adjacent unit base plate

with the connector plugs and sockets.

3. Rotate the locking device clockwise to the LOCKED position.

The ACS800 Standard Application Program 7.x supports the use of four datasets,

two in each direction.

The two datasets for controlling the drive are referred to as the Main Reference

dataset and the Auxiliary Reference dataset. The sources from which the drive reads

the Main and Auxiliary Reference datasets are defined by parameters 90.04 and

90.05 respectively. The contents of the Main Reference dataset are fixed. The

contents of the Auxiliary Reference dataset can be selected using parameters 90.01,

90.02 and 90.03.

The two datasets containing actual information on the drive are referred to as the

Main Actual Signal dataset and the Auxiliary Actual Signal dataset. The contents of

both datasets are partly selectable with the parameters at group 92.

External control is activated by setting parameter 98.02 COMM. MODULE LINK

to ADVANT.