GB/T 16623-2022 英文版 壓配式實心輪胎技術規范

?

我司提供標準英文版，更多信息請?jiān)L問標準翻譯網bzfyw.com

?

前言

?

本文件按照GB/T1.1-2020《標準化工作導則第1部分:標準化文件的結構和起草規則》的規定起草。

?

本文件代替GB/T 16623—2008《壓配式實心輪胎技術規范》。與GB/T 16623- 2008相比，除結構調整和編輯性改動外，主要技術變化如下:

?

——更改了適用范圍（見第1章，2008年版的第1章）;

?

——增加了術語“鋼圈”，刪除了“無印痕實心輪胎”（見3.1，2008年版的3.1）;

?

——更改了物理機械性能指標（見表1，2008年版的表1）;

?

——更改了耐久性能要求及其試驗方法規定（見4.3、5.4，2008年版的4.3、5.4）;

?

——更改了輪胎與輪輞配合尺寸的部分要求（見附錄A，2008年版的附錄D）;

?

——更改了外緣尺寸測量方法和物理機械性能試驗方法的部分規定（見附錄B、附錄C，2008年版的附錄A、附錄B）;

?

——?jiǎng)h除了耐久性能試驗方法（見2008年版的附錄C）。

?

請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別專利的責任。

?

本文件由中國石油和化學工業聯合會提出。

?

本文件由全國輪胎輪輞標準化技術委員會（SAC/TC19）歸口。

Foreword

?

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.

?

This document is drafted in accordance with GB/T 1.1-2020?Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents.

?

This document replaces GB/T 16623-2008?Technical specification of press-on solid tyres. In addition to structural adjustment and editorial changes, the following main technical changes have been made with respect to GB/T 16623-2008:

?

——The application scope is modified (see Clause 1 hereof; Clause 1 of Edition 2008);

?

——The term “steel ring” is added and “no marking solid tyres” is deleted (see 3.1 hereof; 3.1 of Edition 2008);

?

——The physical and mechanical property indexes are modified (see Table 1 hereof; Table 1 of Edition 2008);

?

——The durability requirements and test methods are modified (see 4.3 and 5.4 hereof; 4.3 and 5.4 of Edition 2008);

?

——Some requirements for the fitting size of tyres and rims are modified (see Annex A hereof; Annex D of Edition 2008);

?

——Some requirements for the measurement method of the peripheral dimension and the physical and mechanical property test method are modified (see Annexes B and C hereof; Annexes A and B of Edition 2008);

?

——The durability test method is deleted (see Annex C of Edition 2008).

?

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.

?

This document was proposed by China Petroleum and Chemical Industry Federation.

?

This document is under the jurisdiction of the National Technical Committee on Tyres and Rims of Standardization Administration of China (SAC/TC 19).

?

This document was issued in 1996 as first edition, its first revision was issued in 2008, and this is the second revision.

Technical specification of pressed-on solid tyres

?

1 ?Scope

?

This document specifies the technical requirements, test methods and markings of pressed-on solid tyres.

?

This document is applicable to new pressed-on solid tyres used for counterbalanced fork lift trucks and other industrial vehicles.

?

2 ?Normative references

?

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

?

GB/T 528Rubber, vulcanized or thermoplastic—Determination of tensile stress-strain properties

GB/T 531.1Rubber, vulcanized or thermoplastic—Determination of indentation hardness—Part 1: Duromerer method (Shore hardness)

GB/T 1031Geometrical product specifications (GPS)—Surface texture: Profile method—Surface roughness parameters and their values

GB/T 1689Rubber vulcanized—Determination of abrasion resistance (Akron machine)

GB/T 2941Rubber—General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3512Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method

GB/T 6326Tyre terms and definitions

GB/T 7760Rubber, vulcanized or thermoplastic—Determination of adhesion to a rigid substrate—90 degrees peel method

GB/T 8170Rules of rounding off for numerical values & expression and judgment of limiting values

GB/T 16622Size designation, dimensions and load capacity for pressed-on solid tyres

GB/T 22391Test method of endurance for solid tyres—Drum method

HG/T 2177Appearance quality of tyres

?

3 ?Terms and definitions

?

For the purposes of this document, the terms and definitions given in GB/T 6326 and the following apply.