產品標題: DS200TCRAG1AAA 可控硅模塊/工控卡件PLC/DCS備件模塊

型號：DS200TCRAG1AAA

品牌：GE

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 產品詳情資料：

每個通道能夠?qū)?5至16位（取決于所選范圍）二進制數據轉換為模擬輸出。所有八個通道每12毫秒更新一次。在當前模式下，模塊向CPU報告每個通道的開路故障。當系統電源中斷時，模塊可以進入已知的***狀態。只要向模塊施加外部電源，每個輸出將保持其***值或重置為零（如配置）。此模塊可以安裝在RX3i系統的任何I/O插槽中。隔離+24 VDC電源模塊必須從外部電源接收其24 VDC電源。如果模塊位于RX3i通用背板中，則可通過背板左側的TB1連接器或直接在模塊的接線板上連接外部電源。如果此模塊位于擴展背板中，則外部電源必須連接到模塊的接線盒。LED模塊正常LED指示模塊狀態。用戶電源LED指示外部+24 VDC電源是否存在且高于***水平。兩個LED均由+5 VDC背板電源總線供電。

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ????產品英文詳情料:

Each channel is capable of converting 15 to 16 bits (depending on the range selected) of binary data to an analog output. All eight channels are updated every 12 milliseconds.In current modes, the module reports an Open Wire fault to the CPU for each channel. The module can go to a known last state when system power is interrupted. As long as external power is applied to the module, each output will maintain its last value or reset to zero, as configured. This module can be installed in any I/O slot of an RX3i system. Isolated +24 VDC Power The module must receive its 24 VDC power from an external source. If the module is located in an RX3i Universal Backplane, the external source can be connected via the TB1connector on the left side of the backplane or directly on the module’s terminal block. If this module is located in an Expansion Backplane, the external source must be connected to the module’s terminal block.LEDs The Module OK LED indicates module status. The User Supply LED indicates whether the external +24 VDC power supply is present and is above the minimum level. Both LEDs are powered from the +5 VDC backplane power bus.